Common Warehouse Garage Door Problems and How to Fix Them

As great as garage doors are, they are not without their problems and issues.

At some point in time, you will problem experience them breaking on you.

This much can be expected as these doors, just like everything else, do not have an infinite lifespan.

They wear out, just like any other mechanical system out there in the market.

When your warehouse garage door breaks on you, it is not only a headache but it can even potentially affect your business as a whole.

After all, lost time is time that cannot be spent.

But what can you do to make prevent this from happening or fix the problem generally?

Here at Kald Gart Doors, we understand how much your business means to you and as such we are willing to impart some common knowledge on what to do in case your warehouse garage door breaks on you.

Without further ado, here are some of the most common warehouse garage door problems and how to fix them.

The garage door won’t open

For this problem alone, there are a lot of reasons that could possibly be causing this.

Depending on the root cause, your response would vary accordingly.

If suddenly one day you arrive at your warehouse’s garage doors and you find out that it won’t open, here are some of the things you can do to remedy this.

For starters, if you have an automatic garage door set-up that is completely dependent on electricity, then you should definitely check if your building has power.

It is entirely possible that your garage door is not opening because it does not have the means to.

If it does, then try replacing your remote’s batteries and ensure that the sensors that aid in opening your warehouse are not obstructed.

Also, make sure that your garage door is not set to lock as if it is, it will not open unless you disable this feature.

If these basic troubleshooting options do not help you out, then it is possible that this isn’t your garage door opener’s problem but your garage door’s hardware.

This means that it is entirely possible that you have misaligned tracks or broken torsion springs and the like.

Correcting your misaligned tracks can be as easy as pushing and popping it in to place depending on the design of your warehouse garage door.

If your door’s design is much more complicated, then you might need professional help for that.

If the torsion spring is broken, then that would explain why your garage door would not open as it will not have enough power to do so.

If this is the case, we also recommend hiring a trained professional to help you with the repairs.

If you insist on replacing your warehouse garage door’s spring, then you may refer to the video below to guide you with your task.

Water is leaking under your warehouse garage door

If you are located in an area that rains a lot, then you might be experiencing water leakage under your garage doors.

This can be a problem as it can damage your goods as well as your multitude of equipment inside. If this is the case, you certainly cannot allow it to go on.

Fortunately for you, fixing this problem can be relatively easy.

If you are experiencing water leakage, then possibly your weather seal located at the bottom of your garage doors are showing signs of damage and wearing out.

Try replacing your garage door’s seal and you should be good to go.

Your warehouse’s garage doors do not stay closed

Another common problem you might experience is having your warehouse garage doors automatically open after you close them

If you are using an automatic garage door opener, you might find yourself in a situation where your garage door opens immediately again after it reaches the floor’s surface.

This is happening probably because of your garage door’s limit switch setting.

If this is the case for you, all you have to do is set the proper distance from the top of your door to the surface of the floor.

Your door opens again probably because your inputted distance is greater than the actual distance and thus when it hits the floor; it considers it as an obstruction and as a response— automatically opens it again.

Recalibrate your door’s limit switch and you should be fine.

Conclusion

There are a lot more issues that you probably would experience along the way but these are the most common warehouse garage door problems and how to fix them respectively.

Although these are relatively easy to fic, they should never, at any cost, be left unattended.

Doing this will only give you more problems than you already have.

For your commercial garage door repair needs in Calgary, you can definitely depend on Kald Gart Doors.

Kald Gart Doors is a garage door repair company near you that offers emergency garage door services 24/7, any time of the week.

No matter when or what problem you are having, we will always be there for you.

Here at Kald Gart Doors, we value your business and know how much it would mean to you to have your warehouse garage doors fixed as soon as possible, and we will do just that.

You can contact us at 587-316-9739 for any further inquiries and clarifications regarding our rates and services.

What are you waiting for? Contact us now!