Table of Contents
We keep a lot of things inside our garage.
Car, tools, bicycle, and other bulky items find their home inside our garage.
The garage door ensures that our things are safe and secure from outside elements.
This is also true for businesses.
The overhead doors make it easy for their product to go in and out of the warehouse.
It also protects the equipment, products, and supplies from outside elements.
Hence, a garage door needs to be weatherproof and intruder proof.
A garage door that has gaps and holes is like an invitation for trespassers to come in.
And your valuable things will be exposed to different weather conditions.
A garage door should have no holes or gaps on all its sides.
You can achieve this by placing weather stripping on your garage door.
You can place garage door weather stripping by yourself.
But if you are not confident and want it perfectly done, then you can leave it to the professional.
Call a garage door repair company because they know best how to do it.
Where are Weather Stripping Seals Placed?
Garage door weather stripping is placed on the top, sides, and bottom of your overhead door.
This is to ensure that your garage door is weatherproof and intruder proof.
No rain leaks, sun rays, dust, wind, and trespassers that can enter your garage.
If gaps and holes are present, then do not delay the replacement of your garage door weather stripping.
Is Your Garage Door Weather Stripping Due For Replacement?
Go to your garage and check out for the following tell-tale signs.
- Check if the sun ray is passing through your garage door when it is closed.
- Check for rain leaks after a heavy rain.
- Check if fallen leaves can pass through the bottom of your closed garage door.
- And finally, check if there is air coming from the outside.
If these tell signs are present, then it is time that you have it replaced.
Replacing Garage Door Weather Stripping
Here’s a do it yourself guide in replacing your garage door weather stripping.
Replacing the bottom seal
- Your garage door must be opened halfway when working. Make sure your garage door is secured.
- Pop-out the bottom roller using a hammer.
- Remove the old garage door weather stripping with the help of a flat screwdriver or any pointy tool.
If the seal is hard to remove cut-off the old seal and loosen the pinch that holds the weather stripping.
If it is still hard to remove, call for a garage door repair service.
Your bottom retainer might need some changing.
- Once the old weather stripping is removed. Slide in the T-channel your new bottom garage door weather stripping. You will need a helping hand in doing this.
Placing garage door weather stripping on the top and sides
- You can directly place your garage door weather stripping on top of the existing door stop board. You can either use a vinyl or rubber garage door weather stripping.
- Measure the top and bottom of your garage door and cut out the garage door weather stripping to be used.
- Use galvanized screws or nails in securing the garage door weather stripping.
- For extra sealing, you can use a caulking gun to ensure that there are no gaps on the top and sides of your garage door weather stripping.
How to place weather stripping on the panel door.
- You can use a compressible foam weather stripping or the V-shaped garage door weather stripping.
- Cut the desired length needed. Then stick the weather stripping on the gaps of your panel doors.
Replacing and putting garage door weather stripping is easy.
But if you want to make sure that it is properly done. Call a garage door repair company near you.
Garage Door Repair Service in Okotoks
If you are having trouble replacing your old garage door weather stripping, call us and we are ready to serve you.
Your problem means business to us. We are not limited to repair services. We also do garage door installation.
Whether it’s a residential or commercial overhead door, we fix and maintain them.
We are pleased to accommodate your garage door needs.