Garage Door Remote Not Working? Here’s Why

    Need a repair technician?

    Our garage door repair team in Calgary are the best at what they do.

    CALL ☎️ (587) 316-9739

    Or leave a message.

    When Does A Garage Door System Needs To Be Replaced

    After spending your entire day at work, the last thing you would want to do is to come home only to find out that your overhead door’s remote control is no longer working.

    However, the great news is: overhead door remote controls are not complicated to fix as you imagine.

    In fact, some parts can be fixed on your own, while others might require the aid of a professional – and in that case, garage door repairs in Calgary can help!

    It can be frustrating, but here are a few common reasons why.

    Let’s get started!

    You might want to check the batteries first

    Simple but helpful.

    Note that the remote transmitter requires power to send a signal, and a common reason why overhead door remotes malfunction is due to its dead batteries.

    If batteries are not the primary issue, make sure you are pressing the button within the opener’s range.

    Secondly, if your remote consists of an LED light, make sure it lights up when you press the button.

    If it still did not work, try moving into your driveway first.

    If neither new batteries nor a closer range solved the issue, try reprogramming the remote control through the instructions in your owner’s manual.

    The remote control is facing radio-frequency interference

    If your overhead door remote control does not work whenever you press it, it may be experiencing radio-frequency interference.

    When this occurs, your overhead door will not be able to receive the signal.

    Most of the time, devices such as home alarm systems and motion detectors are the ones behind this.

    Hence, it is best to get in touch with the professional technicians in Calgary to check the issue and which strategy works best for you.

    Dust on the lens

    The eye on your remote transmits the signal to your overhead door opener.

    Although it is not unusual for remote lenses to obtain dirt over time, you must still ensure to clean this area regularly.

    To illustrate, you may wipe the dirt using a soft cloth, specifically the dust accumulated on the remote’s eye area.

    Doing the simple solution above can help you make sure that signals can be transmitted properly.

    The lock button got detached from the panel

    Another basic overhead door fix is to ensure that the lock button on your overhead door’s control panel is attached correctly as anyone from your house might have pressed this button unnoticed.

    You may check it by unlocking the door.

    Once done, test the door’s operations again by pressing the panel’s open button.

    Your overhead door is due for a system reset

    Technically, overhead door systems are like small computers — a good restart can fix a minor glitch.

    The same thing works for your overhead door system — to reset the receiver system, try to unplug the unit for at least a minute, then plug it back in.

    Afterward, try to use the remote control again.

    If you find yourself trying to deal with an overhead door remote that is no longer working, then it might be the time for you to contact an overhead door repair in Calgary.

    A disrupted GFI

    Another reason why your overhead door might not be working is due to a disrupted Ground Fault Interrupter or GFI.

    The role of the GFI is to protect your home from possible dangers involving electricity, such as short-circuit and overheating potentials.

    Thus, a malfunctioning GFI would generally stop the door from operating at all.

    It might also begin utilizing the back-up battery in some models.

    However, you can quickly fix a blown GFI by pressing the reset switch on the wall outlet that corresponds with your overhead door.

    If it still does not respond, call an overhead door technician immediately to inspect and recommend hardware replacement.

    What if it still does not work?

    Just because your overhead door is not moving, that does not mean the remote is the problem.

    The issue may be coming from the track or the door itself.

    If you are a homeowner of Calgary looking for the best overhead door professionals, worry no more.

    Feel free to contact certified overhead door experts who can offer quality and budget-friendly overhead door maintenance services.

    Whether you need to replace your remote control or need more information about your overhead door, our professionals at Calgary are here to help.

    Rate this post
    David Martin

    David Martin

    Servicing garage doors for over a decade has thought me a thing or two about garage doors. In this blog I will try to share with you all I've learned over the years. I hope you find these tips helpful for a DIY fix before paying for a technician. If you still need help, don't hesitate to give us a call.

    Contact Us
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar