Table of Contents
Garage Door Remote Not Working Consistently
Ever wondered why your garage door remote is not working as usual? Come home from a long day at work only to find out that your remote does not open your garage door?
If you are using an automatic garage door opener, chances are you using a switch or remote to control your overhead garage door.
If you are one of these individuals that uses a remote to open and close their garage door, then this article may be more helpful to you than you think.
After all, when you cannot open your garage door, it can only be an inconvenience for anyone.
When your ‘garage door remote not working consistently’ issue becomes a common recurrence, here are some things you can do to solve your problem.
Garage door remote – why and what you can do to solve the problem
If your garage door is not opening, it is possible that the problem isn’t your garage door but instead your garage door remote.
A defective garage door remote can cause all sorts of problems for the homeowner when opening and closing their garage door. Since the remote is not working, then chances are you will not be able to open your garage door at all.
But why is your remote not functioning the way it should and what can you do to prevent or solve the issue?
If the remote is your problem, then you do not have to worry any longer. In this article, we will be discussing the different possible reasons as to why your remote is malfunctioning and the different things you can do to resolve each situation.
#1 The lock button is turned on
On your garage door’s control panel, there is a feature that allows you to lock your garage door.
To keep your door up and running again, all you need to do is check if this specific feature is enabled and if it is, make sure to disable it.
It is possible that you might not have noticed that you turned this feature on accidentally. In this case, your remote is not the one at fault here.
To fix this problem, check your door’s control panel for a blinking light. This is an indicator of sorts that will tell you if your door is indeed locked.
If it turns out that your door is locked, press and hold the ‘Lock’ button to disable it.
After doing so, check if this solved your problem. Try opening and closing your garage door using your remote.
Did it work? If the problem was indeed the lock feature being enabled, then this solution should work.
#2 The battery on your remote is exhausted
Another possibility as to why your remote is not functioning could be because your batteries are empty.
If you have been using your garage door’s remote for a long time now, then it may be about time to have their batteries replaced.
Ofcourse, when you get the batteries replaced, you will also need to reprogram your remote as well.
Before panicking because your garage door remote is not working, try to change their batteries first. Who knows, this might do the trick.
In the meantime, if you do not have spare batteries, you can use your garage door’s wall-mounted control panel to operate and open your overhead garage door.
#3 The remote’s signal is interrupted
If even after replacing them with fresh new batteries your garage door remote still does not respond, then there may be something disrupting the signal between your remote and your opener.
Another possibility would be you and your neighbor using the same frequency on their garage door’s remote.
Whichever it may be, if your signal is being jammed, then there are two things you can do.
First, you can try to check and see if there is any damage or debris on your opener’s antenna, and second, reprogramming your remote.
If you do not know how to do any of the two, you may choose to seek professional help to help you with your needs.
#4 Wiring malfunction on your door’s control wire or receiver board
It is entirely possible that your problem at hand is not the remote itself but the wires on your garage door opener’s control board.
Now, this can be a little tricky to solve compared to the above-mentioned causes but with a little help, I’m sure you’ll manage to do just fine.
Fixing your door’s wires will require a bit more effort though.
If you find out that this may be the case for you, then do the following easy steps below to help you on your way to fixing this problem:
- Unplug your garage door opener from the power outlet. Make sure to do this to prevent any unwanted accidents or injuries. Then, you may proceed to disconnect the two wires from the motor.
- Reconnect your motor to the power source then clear your opener’s memory and reprogram all of its controls.
- Unplug your device for the second time and reattach the control wirings to the motor.
- Locate your wall-mounted control and make sure to disconnect the wiring.
- Using your remote, check on your door’s functionality and see if it works now.
Conclusion
The ‘garage door remote not working consistently’ problem occurs from time to time.
If you happen to encounter this, make sure you do not panic as this is nothing that you cannot fix.
If for some reason the instructions above are somewhat unclear for you, you may try to check and see this video on common fixes when your garage door remote is not working to guide you with your problem.
If you are a homeowner located in Calgary and are looking for a garage door repair company near you to help you with your remote related problem, then Kald Gart Doors will always be ready to attend to your needs.
Our company is available 24 hours and 7 days a week to provide you with emergency garage door services perfect for your needs.
We will surely be able to get your remote fixed for you in no time.
What are you waiting for? Contact us now and see for yourself what we can offer.