While it’s true that fixes and repairs should be left to the professionals, some overhead door fixes don’t actually necessarily need an expert’s help.
We’ve prepared a short list of garage door maintenance checks that can be done by any homeowner looking to save a quick buck!
Tighten Up Loose Screws
The first thing that any homeowner should do when checking the condition of their garage doors is to look at its hardware.
Some nuts and bolts of the overhead door may move around or become loose over time because of all the vibrations and the movement from opening and closing the overhead door.
If there are many nuts and bolts left untightened, chances are some of the hardware the garage door has will end up falling off, which will ruin the whole dynamic of the garage door itself.
Regularly check for and tighten anything that may have come loose.
Check the Rollers and Tracks
The rollers are the ones responsible for gliding the garage door along its tracks.
Some built-up dirt and debris might end up stuck within the tracks and will end up slowly breaking the rollers themselves.
Always inspect the tracks for anything that may block the rollers and stop them from rolling freely along the garage door’s tracks.
One thing to remember is that rollers also wear out, so visually checking for cracks and chips on the rollers is essential.
In the event that there is a problem with the bottom roller, do not try to fix it.
The lift cable is connected to the bottom roller, and handling that part without the proper tools and the proper knowledge can actually injure or maim the house owner.
Check the Cables
Check the garage door’s cables for any form of fraying or broken strands that are sticking out.
This is very dangerous as the cables are under high tension, which means that they can dangerously snap and injure anybody near them if the cables give out.
It is very important to see if the cables are still in good working condition to be safe around the garage door.
Another thing to look out for is if the cables are loose.
Loose cables actually mean that the garage door’s springs are broken.
The springs tightly bound the garage door’s cables together, and if they seem to be loose and not bound at all, there is definitely an issue with the garage door’s springs.
Lubricate Any Moving Parts
Usually, if the moving parts of a garage door aren’t lubricated, they either high or low pitched make metal screeching noises.
If sounds are coming from the garage door’s moving parts, it’s best to have them lubricated.
Lubricate the moving parts with white lithium grease, which is a form of lubricant that is also available as a spray.
Check for rust and corrosion among the moving parts as well.
Rusty and corroded parts will actually deteriorate faster and would have shorter lifespans than the parts that haven’t rusted out.
Replace the Weatherstrip
The weatherstrip is one of the most important parts of the garage door.
It keeps the cold, water, insects, and debris out of the garage, and that’s especially important with the Calgary weather.
Due to the constant exposure to different types of weather, the rubber weatherstrip can become brittle.
If the garage door’s weatherstrip is brittle, the best course of action is to replace it.
Replacing the weatherstrip can be done by any homeowner, as weatherstrips are relatively easy to find at any local hardware store or home improvement store.
With saving money in mind, there are only so many things you can do to maintain your garage door without the help of professionals.
In the end, it is still better to hire experts from overhead door repair companies that have the proper knowledge of handling garage doors.
There are many garage door repair companies in Calgary listed online, and almost all of them are affordable.
Indeed, an expert’s help is preferable; after all, you can never put a price on safety!